Silhouette Studio® 4.2 introduces Print Bleed as a feature for all editions, standard and above. To show you how this feature works, we will be using Design ID #58727. In the Page Setup panel, you’ll find the option to turn on Print Bleed at the bottom of the panel.
Check the box for Print Bleed, and all of the colored designs on your page will print with the color extended beyond the original design.
This allows your Silhouette machine to cut off the excess color on your Print & Cut leaving no white edges on your final cutout. You will not see a preview of the print bleed on your design page at this time. It will only show up when the document is printed.
The default bleed radius of 0.050 in it can be adjusted up or down based on your personal needs.
The printout with print bleed enabled may look a little awkward because of the extra color, but that extra gets cut off when you send it to your Silhouette machine.
Here are a few things to pay attention to as you work with Print Bleed. If your design has a white background, you will not get any print bleed effect.
The background next to your design must be clear. If your design has clear space between the colored portions and the cut line but the cut lines don’t not hug the design, your print bleed may not work the way you want it to.
If you do want to have a white border around your designs, then turn off Print Bleed or make sure that the area that extends beyond your colored portion has a white fill color instead of clear.
Remember to turn on registration marks and verify you have cut lines before printing so your Silhouette machine knows where to cut.
Print bleed works for any colored objects on your page that will be printed, whether that’s images, designs, or colored text. Checking the box applies to all objects on the page.
We hope you enjoy this new Print Bleed feature available in all editions of Silhouette Studio® 4.2.
Becky Evans
August 13, 2019
Does it only work on print and cut files? I tried it on other files and it does not work with them
Kelly Wayment
August 21, 2019
Yes, it is only for print & cut files.
Patty Chalas
August 13, 2019
This Is a great addiction and upgrade to the software.
Can’t wait to use it!
Russ Yeager
October 12, 2019
Doesn’t work with png. Files
Kelly Wayment
October 14, 2019
It should work with .png files. Make sure it has a clear background and not a white background. Print bleed will not show up if the colored design has a white background.
Russ Yeager
October 14, 2019
I have tried it on both of my computers one on version 4.2 and one on 4.3 and I updated the firmware. I doesn’t work with my png files they have a clear transparent background. I looks like its trying to do it because there is a little bit of color that shows up around the image but not much.
Kelly Wayment
October 15, 2019
That little bit of color sounds like it may be working as intended. When your designs have multiple colors, the print bleed as it’s currently set up shows a mix of the colors in the design. The print bleed only shows a solid color if the design itself is filled with a solid color.