By Jan 19, 2018

Introduction to Cameo 3

The Silhouette CAMEO® is the ultimate DIY machine. It uses a small blade to cut over 100 materials, including paper, cardstock, vinyl, and fabric up to 12 inches wide. The Cameo has the ability to register and cut printed materials and is PixScan™ compatible.

By Jan 19, 2018

Cameo 3 Specifications

The Silhouette CAMEO® 3 is the ultimate DIY machine.

By Jan 19, 2018

Cameo 3 Setup

Welcome to the setup guide for your Silhouette CAMEO® electronic cutting machine. These step-by-step instructions will help guide you through the process of setting up your Silhouette. Step 1: Create Account Start by taking your machine out of the box. Once the CAMEO is out of the box, you may register your machine at silhouetteamerica.com/setup. On […]

By Jan 19, 2018

AutoBlade (Cameo 3)

The  Silhouette  AutoBlade  is  available  for  the  CAMEO 3 and can only be used in the left-hand tool holder. With  the  AutoBlade,  you  don’t  have  to  manually  adjust  your  ratchet  setting!  Simply  let  your  machine  do  all  the  work  for  you. Silhouette  Studio®  will  give  you  recommended  Cut  Settings,  and  you  can  adjust  them  in  […]

By Jan 19, 2018

Deep Cut (Cameo 3)

The Silhouette CAMEO® 3 has all of the same capabilities as the previous versions along with some added features. The Silhouette CAMEO® 3 has an increased clearance level (2 mm) compared to previous versions of the CAMEO. This allows you to cut thicker materials, such as craft foam, chipboard, leather and more, using the Deep-cut Blade. The Deep-cut Blade has a […]

By Jan 19, 2018

Dual Carriage (Cameo 3)

Like Curio, the Cameo 3 features a dual carriage. Are you like us and are a little bit EXCITED about the project possibilities? The tools are marked with little red circle on the left and a blue circle on the right. Insert your tools (such as an AutoBlade and a sketch pen) into the corresponding tool holders assigned in your Send […]

By Jan 19, 2018

Bluetooth® (Cameo 3)

Using Bluetooth® technology, your Cameo can receive cut jobs by devices other than your computer. This also means your Cameo will be able to receive cut jobs without being attached to your computer. Use Bluetooth® to get some of those pesky cords out of the way! There are two versions of the Silhouette CAMEO® 3 offered: The Bluetooth® Edition and the Bluetooth® […]