Introduction to the Silhouette Alta® Plus
Product Specifications9.875 in x 9 in x 18.75 in9.7 lbs Filament Type1.75 mmNonproprietary PLA filament Layer ThicknessFrom 0.05 mm to 0.5 mm Print Volume124 mm x 124 mm x 130 mm Introduction […]
Cutting Without a Mat
We’ve been getting a lot of questions recently about how to cut without a mat! We figured we should do a deep dive of explaining the two ways you can cut without […]
Introduction to the Silhouette Cameo® Plus
The Silhouette Cameo® Plus has all the great perks of the Cameo 4, but it’s wider, so it has a bigger cutting footprint. It can accommodate rolls up to 15 inches wide, […]
Cameo 4 FAQ
With a new year upon us, and many of you the lucky recipients of new Cameo 4 Machines compliments of Santa Clause, 😉 we thought we would make a post to address […]
Punch Tool for Cameo 4
The Punch Tool for Cameo 4 is a specialty tool specifically designed to be used with the Silhouette Cameo® 4 cutting machines, including the Cameo Plus and Cameo Pro (coming soon). Its […]
Introduction to the Silhouette Cameo® 4
Product Specifications 22.44 in. x 7.68 in. x 6.69 in. 10 lbs 6.4 oz Max Cutting Area 12 in. x 24 in. (mat) 12 in x 10 ft. (roll) Max Media Thickness […]
Cameo 4 Specifications
Silhouette Cameo® 4 Specifications Silhouette Cameo® 4 desktop cutting system The Cameo 4 is a desktop cutting machine for the modern maker. With a built-in roll feeder and crosscutter, the Cameo is […]
Silhouette Cameo® 4 Setup
After you’ve bought your Silhouette Cameo® 4, you need to make sure to unbox it and set it up properly so that you’re getting the best use out of it. You can […]
Silhouette Cameo® 4 Auto Tool Detection
New to the Cameo 4 is the Auto Tool Detection feature. This allows the software to detect what tool is inserted into the machine, and the software automatically populates the tool and […]
Silhouette Cameo® 4 Built-in Roll Feeder and Crosscutter
Two of the awesome features of the Cameo 4 are the built-in roll feeder and crosscutter. These make cutting from a roll of material (like vinyl or heat transfer) really simple. And […]
The AutoBlade for Cameo 4
The AutoBlade for Cameo 4 is very similar to the previous version of the AutoBlade. Both blades automatically adjust the blade depth so that you don’t have to. However, the AutoBlade for […]
Silhouette Cameo® 4 Tool Adapters
The dual carriage of the Silhouette Cameo® 4 is a little bit different from the carriages from previous Silhouette machine models. Because of this, some of the older Silhouette tools won’t fit […]
