The AutoBlade for Cameo 4 is very similar to the previous version of the AutoBlade. Both blades automatically adjust the blade depth so that you don’t have to. However, the AutoBlade for Cameo 4 is a step above its predecessor.
The AutoBlade for Cameo 4 can make an adjustment using only a few clicks—the first click turns the blade to zero and the following clicks set the blade at the depth indicated in Silhouette Studio®. If you are doing two or more cut types on a project, the AutoBlade will pause, return home, and readjust to the correct blade depth following the same process as the initial blade depth adjustment.
We hope you enjoy this updated version of the AutoBlade!
Please note that the AutoBlade for Cameo 4 is compatible with the Cameo 4 only.
Everything to Know About Silhouette Blades 
Valentine Decor
Kelly Wayment
June 28, 2024
You can use it with vinyl as long as it is smooth and flat to allow the static charge to hold on to it. Rolled vinyl that wants to go back to its rolled shape will not necessarily work well, and it would need to be trimmed to fit the ES mat cutting area.
Kelly Wayment
June 28, 2024
Yes, you can use the heat pen while using the ES mat. 🙂
Yurii
March 2, 2024
Hello. May it be used with heat pen?
Thanks
Jerome
February 24, 2024
Hi, works this with the normal vinyl foils or only with printer papter etc?
Kelly Wayment
February 16, 2024
Once you’ve pushed the mat up against the rollers, just press the “Load” arrow button (bottom right on the display). Does a regular sticky mat load into the machine for you?
Michelle a goodall
January 24, 2024
Hello! I just got my new electrostatic mat and have watched every video i can find on it. However, what i can t find is why it wont feed into my cameo 5/ it slides right up the rollers but wont go any further. and yes- iam pushing the into button. help!